wall_thickness: Pass ✓ min 1.8mm
part_id: Drone Arm Mount (97%)
suggest_orientation → Apply / Skip
overhangs: Warn 4.2% at 52°
tiny_features: Fail 0.32mm
mounting_tab ×4 screw_hole ×6
auto_arrange → 9 per batch
faces: 12,847 dims: 142×35×18mm
Those ribs are 3× stronger than the originals.
Rotating 15° eliminates all overhangs.
CF-PETG — your H2D handles it at 280°C.
9 per batch on the H2D with 3mm clearance.
The 0.32mm detail needs your Form 4.
I added 0.15mm tolerance to all 6 screw holes.
Bambu Lab H2D — 325×320×325mm
"Prefers PETG for functional parts"
non-manifold edges: 0 ✓
$2.60/unit — CF-PETG @ 0.2mm
Form 4 — Tough 2000 Resin
"Always 3 walls minimum"
est. print time: 47min per unit
thread ×2 chamfer ×8
hole_tolerance: +0.15mm applied
viewing: front-right 45°